GEC Variable Speed DC SHUNT MOTOR and Speed Controller. The input voltage to the speed control unit can be 240volt single phase.
This is a perfect combination for converting a three phase lathe to single phase. What's included, first the motor details. Armature voltage 180vdc Armature current 9.8Amps.Field voltage 210vdc Field current 0.38Amps. Diameter of main body 210mm.
Input voltage 240vac single phase or 415vac two phase. Has connections for speed control via a 5k potentiometer.Remote On off and a tacho feedback if required. Speed controller would need to be housed in a control box , you could mount the 5k pot on the front along with the stop start and an emergency stop. Basically you need a 240 volt ac supply by way of a 13amp plug, then a five core cable from the motor to the controller. This set up is ideal for a Lathe conversion, plenty of grunt in the 1.5KW motor, single phase. If your not confident to install this I would recommend you engage the services of a qualified Electrician. Collection and or inspection very welcome. The item "1.5KW DC SHUNT MOTOR 3000rpm + Variable Speed Control Unit 240v Lathe Project" is in sale since Saturday, December 21, 2019. This item is in the category "Business, Office & Industrial\Industrial Automation & Motion Controls\Electric Motors\General Purpose Motors". The seller is "weldandheat" and is located in Sheffield. This item can be shipped to United Kingdom.