Motor Speed Controller

200With300With400With600W CNC Air cooled Engraver Spindle Motor DC12V-48V 12000r ER11

200With300With400With600W CNC Air cooled Engraver Spindle Motor DC12V-48V 12000r ER11
200With300With400With600W CNC Air cooled Engraver Spindle Motor DC12V-48V 12000r ER11
200With300With400With600W CNC Air cooled Engraver Spindle Motor DC12V-48V 12000r ER11
200With300With400With600W CNC Air cooled Engraver Spindle Motor DC12V-48V 12000r ER11
200With300With400With600W CNC Air cooled Engraver Spindle Motor DC12V-48V 12000r ER11
200With300With400With600W CNC Air cooled Engraver Spindle Motor DC12V-48V 12000r ER11
200With300With400With600W CNC Air cooled Engraver Spindle Motor DC12V-48V 12000r ER11
200With300With400With600W CNC Air cooled Engraver Spindle Motor DC12V-48V 12000r ER11
200With300With400With600W CNC Air cooled Engraver Spindle Motor DC12V-48V 12000r ER11
200With300With400With600W CNC Air cooled Engraver Spindle Motor DC12V-48V 12000r ER11
200With300With400With600W CNC Air cooled Engraver Spindle Motor DC12V-48V 12000r ER11
200With300With400With600W CNC Air cooled Engraver Spindle Motor DC12V-48V 12000r ER11

200With300With400With600W CNC Air cooled Engraver Spindle Motor DC12V-48V 12000r ER11    200With300With400With600W CNC Air cooled Engraver Spindle Motor DC12V-48V 12000r ER11
Diameter of Axis collect holder:16mm. Repeat accuracy: 0.01-0.03mm.

Wide voltage PWM DC brush motor speed controller. Applies to DC12-60V low voltage permanent magnet brushed DC motor. Operating Voltage: Wide Voltage (DC) DC12V-DC60V (Max 65V). A: Default potentiometer control (5K-100K), defaults 10K.

B: MACH3 -PWM speed control signal input, external PWM input requirements: level 3.5-12V VPP, frequency 1K-10KHZ, suitable for MACH3 spindle speed control. Rated current: 10A, overload and short circuit protection current 12A. (Over-current cut output, overcurrent indicator flashes, the potential light is off, overcurrent lift). Prevent excessive current caused by the motor and power damage (default 0 seconds soft start), 0-5 seconds adjustable.

Control power: 12V120W, 24V240W, 36V360W, 48V480W, 60V600W. Dimensions: Length 75mm Width 75mm high 42mm. Pulse width modulation range: 0% -100%.

When using a PWM signal control mode, need to unplug Potentiometer, or it will be unable to use PWM mode. Other Accessary As your Choice. The item "200With300With400With600W CNC Air cooled Engraver Spindle Motor DC12V-48V 12000r ER11" is in sale since Wednesday, July 26, 2017.

This item is in the category "Business & Industrial\Automation, Motors & Drives\Electric Motors\Other Electric Motors". The seller is "imix-mart" and is located in China. This item can be shipped worldwide.

  • Brand: Unbranded/Generic
  • MPN: Does not apply
  • Country/Region of Manufacture: China


200With300With400With600W CNC Air cooled Engraver Spindle Motor DC12V-48V 12000r ER11    200With300With400With600W CNC Air cooled Engraver Spindle Motor DC12V-48V 12000r ER11