Motor Speed Controller

80V MultiMode PMC SepEx Motor Speed Controller 1244-6661 600A for CURTIS SZ

80V MultiMode PMC SepEx Motor Speed Controller 1244-6661 600A for CURTIS SZ
80V MultiMode PMC SepEx Motor Speed Controller 1244-6661 600A for CURTIS SZ
80V MultiMode PMC SepEx Motor Speed Controller 1244-6661 600A for CURTIS SZ
80V MultiMode PMC SepEx Motor Speed Controller 1244-6661 600A for CURTIS SZ
80V MultiMode PMC SepEx Motor Speed Controller 1244-6661 600A for CURTIS SZ

80V MultiMode PMC SepEx Motor Speed Controller 1244-6661 600A for CURTIS SZ  80V MultiMode PMC SepEx Motor Speed Controller 1244-6661 600A for CURTIS SZ

Customers need to let us know accelerator mode(0-5v, 0-5k, 5k-0, optional). Please leave us a message about the one you need. These programmable controllers are simple to install, efficient, and cost effective. Typical applications include low lifts, stackers, fork lifts, reach trucks, personnel carriers, counterbalance trucks, order pickers, boom trucks, and other industrial vehicles. The 1244 MultiMode controller offers smooth, silent, cost effective control of motor speed and torque.

A four quadrant, full-bridge field winding control stage is combined with a two quadrant, half-bridge armature power stage to provide solid state motor reversing and regenerative braking power without additional relays or contactors. The 1244 controller can also be specified to be compatible with CAN Bus communication systems. The programming device provides diagnostic and test capability in addition to configuration flexibility. Half-bridge armature power MOSFET design.

Two fault outputs provide diagnostics to remotely mounted displays - Continuous armature current control, reducing arcing and brush wear - Automatic braking when throttle is reduced from either direction;this provides a compression braking feel and enhances safety by automatically initiating braking in an operator hands off condition - Deceleration Rate, Load Compensation, and Restraint features prevent downhill runaway conditions;speed is controlled to within approximately 20% of level surface value - MultiMode allows four user-selectable vehicle operating personalities - Programmable to match individual separately excited motor characteristics - Meets or exceeds. Vehicle top speed is controlled and limited in each mode - Linear temperature and undervoltage cutback on motor currents;no sudden loss of power under any thermal conditions - High pedal disable. And static return to off. Usually it cost about 35USD-50USD. The item "80V MultiMode PMC SepEx Motor Speed Controller 1244-6661 600A for CURTIS SZ" is in sale since Thursday, May 16, 2019.

This item is in the category "eBay Motors\Parts & Accessories\Golf Cart Parts & Accessories\Other Golf Cart Parts". The seller is "thanksbuyer-hobby" and is located in ShenZhen. This item can be shipped worldwide.

  • Field 2 Minute Current Rating (amps): 50
  • Dimensions: L229xW178xH81 mm
  • PWM operating frequency: 16 kHz
  • Electrical isolation to heatsink (min.): 500 VAC
  • ogic input voltage: >;7.5 V High;<;1 V Low
  • Logic input current: 10 mA
  • Operating ambient temperature range: -40°C to 50°C
  • Heatsink overtemperature cutback: 85°C
  • Heatsink undertemperature cutback: -25°C
  • Package environmental rating: IP64/IP67
  • Manufacturer Part Number: Does Not Apply
  • Brand: Unbranded
  • Warranty: 2 Year
  • CURTIS Model: 1244-6661
  • Norminal Battery Voltage(Volts): 80V(72Vdefault se
  • Amature Current Limit (amps): 600
  • Amature 1 Minute Current Rating (amps): 600
  • Amature 1 Hour Current Rating (amps): 140

80V MultiMode PMC SepEx Motor Speed Controller 1244-6661 600A for CURTIS SZ  80V MultiMode PMC SepEx Motor Speed Controller 1244-6661 600A for CURTIS SZ