Motor Speed Controller

Castle Creations Monster X 1/8 Brushless Combo with1512 Sensored Motor (2650kv)

Castle Creations Monster X 1/8 Brushless Combo with1512 Sensored Motor (2650kv)

Castle Creations Monster X 1/8 Brushless Combo with1512 Sensored Motor (2650kv)    Castle Creations Monster X 1/8 Brushless Combo with1512 Sensored Motor (2650kv)
Putting the X in Extreme! Mamba Monster X is our latest 1:8 scale and Monster truck controller capable of 2S - 6S LiPo, with an 8 amp peak BEC - and, its waterproof, so you can run your vehicle through morning dew, across soggy snow, or a muddy trail. This is the perfect upgrade for 1:8 scale buggies, truggies and on-road vehicles as well as 1:10 scale monster trucks weighing up to 15 lbs. It also comes standard with a highly efficient, 30mm ESC cooling fan.

Mamba Monster X also features updated Audible Alerts that will notify you of possible issues with calibrations and error conditions to help diagnose problems in the field. Version 2.02 offers improved low speed control, stronger drag brake, new Aux Wire Mode "Crawler/Rock Race", and MUCH more.

Check out all of the changes here and be sure to update your new Mamba X via the Castle Link! Now With a Sensored Motor! The Mamba Monster X is now paired with our brand new sensored 15xx series motors.

We have taken our award winning 15xx series motors and added sensor capabilities. So now you can all of the torque and performance you know and love and have even more control! We still use the same high quality components as our sensorless motors, such as ultra-thin stator laminations, high temperature sintered neodymium magnet and high RPM ABEC3 bearings. Combo includes required Castle sensor harness and sensor wire for sensored operation. Some drivers and applications are better suited for sensored motors.

Some drivers need smoother throttle control in racing environments. When coming out of a corner a sensorless motor may not provide optimal throttle control and can cause the motor power to surge a bit. With sensored motors the throttle will feel smoother and more linear which allows for more precise throttle management. If you are simply bashing and not racing on a track you will most likely not see the full benefits from a sensored operation. Mamba Monster X features the addition of a new, programmable Auxiliary Wire that allows you to make on-the-go adjustments to several settings such as torque control, and max throttle, and fine-tune the performance of your ESC right from the transmitter using an auxiliary channel on the receiver.

The AUX wire function is disabled by default but is programmable via Castle Link. Once you have programmed the functionality of the AUX wire, that setting can then be adjusted on-the-go from a compatible transmitter. Mamba Monster X can capture and record performance data from your last couple of runs, commonly referred to as data logging. You can then analyze this data and make adjustments to the ESC to maximize both performance and battery life. Real-time data such as ESC temperature, voltages and RPM can be monitored to ensure performance advantages and spare you the unknown parameters that all R/C enthusiasts experience at some point. Telemetry data provides another level of protection and can increase performance. This is the perfect motor for 1:8 scale buggies, truggies and on-road vehicles as well as 1:10 scale monster trucks weighing up to 15 lbs. Paired with our Mamba Monster X ESC you will have all the power your 1/8th scale vehicle demands with the smoother throttle control of a sensored motor. MIN: 2S LiPo MAX: 6S LiPo (25.2V).

Adjustable: 5.5V, 6.0V, 7.5V. Or 8.0V (8A Peak), default 5.5V. Waterproof design allows for use in nearly any environment.

Yes, but may be disabled for racing. Yes, factory equipped (30mm), fully removable (see Product Use Statements below). Length: 2.09" (53mm) Width: 1.93" (49mm) Height: 1.44 (36.4mm). Weight (with no battery connector). 6.5mm female bullets for motor connection. Battery Connector required, 6.5mm Castle Connectors are recommended. Although Mamba Monster X and Castle brushless motors are waterproof, they are not intended for operation while completely submerged in liquid. They can corrode when exposed to corrosive materials, such as salt water. Always rinse the ESC and motor with clean water after exposure to corrosives or dirt.

While the motor and controller may be waterproof, we suggest users confirm that the rest of their vehicle, including the batteries, servos, radio and chassis are also waterproof before exposing them to liquids of any kind. The cooling fan must be removed prior to driving in wet conditions. Intended for up to 6S (25.2 Volt) operation in vehicles weighing less than 15 lbs, with batteries, ready-to-run.

Combo includes Castle sensored 1515 2200Kv: Max Cells: 6s Lipo or 16 NiMH. Less than 15 lbs, with batteries, ready-to-run.

Fully programmable Castle feature set using. (coupon for free Link included) and freely downloadable Castle Link Windows software. Mamba Monster X setups frequently hit 100+ amps in peaks and not all LiPos are created equal. Surge ratings should never be used to determine a pack's suitability for a brushless application.

Recommended battery capacity for 1:8th scale vehicles is 5000mAh. We recommend using 30C continuous discharge or higher LiPo batteries (or high quality 25C batteries such as Traxxas® Power Cell). Our experience suggests using only mild gear ratios with NiMH cells. Do not attempt to use NiMH cells in extreme setups. Applying voltages higher than 25.2V will cause irreparable damage to ESC. We recommend a high-current connector designed for high-powered electric systems, rated for 70+ amps. Invest in connector sets made for high-powered electric systems such as our CCBULLET 6.5mm, Castle 6.5mm Polarized Connectors, Traxxas® Power Connectors, or Deans® Ultra Plugs.

Length: 75.4mm Diameter: 40mm (41.4mm with fins). 6.5mm male Castle Bullet Connectors, includes 210mm length sensor wire. Ideal for 1:8 scale buggies, truggies, on-road vehicles and 1:10 scale monster trucks up to 15lbs. Running modes: SMARTSENSE, Sensored, Sensorless with Castle sensored capable ESCs.

Water Resistant Design: The sensor board is coated with silicone conformal coating to protect the sensors from moisture. The sensor connections are not water resistant; water can cause signal loss which could result in loss of sensored capabilities.

Castle recommended applying dielectric grease to the outside of the sensor wire connections after installation of the wire. Routine maintenance is recommended after running in wet conditions.

No outside sales or payments. (These are the buyers responsibility). We do not lower the value on packages. All manufacturers require us to have buyers forward all warranties to them.

Powered by SixBit's eCommerce Solution. The item "Castle Creations Monster X 1/8 Brushless Combo with1512 Sensored Motor (2650kv)" is in sale since Friday, September 13, 2019. This item is in the category "Toys & Hobbies\Radio Control & Control Line\RC Model Vehicle Parts & Accs\Control, Radio & Electronics\Speed Controllers". The seller is "pa39r" and is located in Lebanon, New Jersey. This item can be shipped worldwide.

  • UPC: Does Not Apply
  • Item Condition: New
  • Brand: Castle Creations
  • Model: 010-0145-04
  • Compatible Motor Type: Brushless
  • Compatible Vehicle Type: Cars, Trucks & Motorcycles
  • Custom Bundle: No
  • Type: Electronic (ESC)
  • Compatible Fuel Type: Electric
  • Compatible Scale: 1:10
  • MPN: 010-0145-04

Castle Creations Monster X 1/8 Brushless Combo with1512 Sensored Motor (2650kv)    Castle Creations Monster X 1/8 Brushless Combo with1512 Sensored Motor (2650kv)