It is also a perfect option for 1/10th scale monster trucks and custom RC monstrosities weighing up to 15 lbs! Extreme Power Extreme Control Extreme Fun! The Monster X provides even more extreme performance than the Monster 2. Most notable is the addition of a programmable Auxiliary Wire that allows users to make on-the-go adjustments to several settings, such as torque control and max throttle. The Auxiliary Wire allows users to fine-tune the performance of their Monster X ESC right from the transmitter using an auxiliary channel on the receiver.The AUX wire function is disabled by default but is programmable via Castle Link. Once the user has programmed the functionality of the AUX wire, that setting can then be adjusted on-the-go from a compatible transmitter. The Monster X also features updated Audible Alerts that will notify drivers of possible issues with their calibrations and error conditions to help diagnose problems in the field.
Extreme Power The Monster X is capable of running from 2S to a maximum of 6S LiPo power, but now features an improved heavy-duty adjustable Battery Eliminator Circuit (BEC) to provide plenty of power for todays power hungry servos. The Monster X BEC voltage is adjustable from 5.5V, 6.0V, 7.5V and 8.0V with an 8 AMP peak. The Monster X also comes standard with a highly efficient, 30mm ESC cooling fan.
Monster X Data Logging The Monster X also has the ability to capture and record performance data from your last couple of runs, commonly referred to as data logging. The user can then analyze this data and make adjustments to the ESC to maximize both performance and battery life. Telemetry Ready Compatibility Coming Soon for Futaba T4PX Transmitters!
BUS Telemetry Link when it is released. Real-time data such as ESC temperature, voltages and RPM can be monitored to ensure performance advantages and spare you the unknown parameters that all R/C enthusiasts experience at some point. Telemetry data provides another level of protection, can increase your tuning awareness and in turn, let you have more time having fun.Castle Link Adjustable Settings for Monster X include. Additional Castle Link Benefits include. Access all firmware updates, included added feature sets released from Castle Engineering FREE of charge. Ability to save basic to complex setup profiles for later use. Input Voltage Range: MIN: 2S LiPo; MAX: 6S LiPo (25.2V).
BEC Specifications: Adjustable: 5.5V, 6.0V, 7.5V. Or 8.0V (8A Peak), default 5.5V. Operating Environment: Waterproof design allows for use in nearly any environment. Reversible: Yes - with lockout.
ESC Cooling Fan: Yes, factory equipped (30mm), fully removable and replaceable. Size: 5.3cm x 4.9cm. Weight: 3.93oz / 111.5g (w/o battery connector soldered to ESC). Application Guidelines: Up to 6S (25.2 Volt) operation in vehicles weighing less than 15 lbs, with batteries, ready-to-run.Items Needed for Operation: Battery Connector required, Castle 6.5mm Connectors are recommended. Input Voltage Range: 2-6S LiPo. Diameter: 40mm (41.1mm w/fins). Weight (w/wires): 429 g / 15.1oz.
Cooling Fan: Optional - Coming Soon. Connectors: 6.5mm male Castle Bullet Connectors. Application Guidelines: Ideal for 1:8 scale off-road and on-road vehicles as well as 1:10 scale Monster Trucks up to 15lbs. Recommended ESC(s): Mamba Monster X.Recommended Vehicle Weight: Up to 15lbs. Tech Notes: Running modes: SMARTSENSE, Sensored, Sensorless. Although Mamba Monster X and Castle brushless motors are waterproof, they are not intended for operation while completely submerged in liquid. They can corrode when exposed to corrosive materials, such as salt water. Always rinse the ESC and motor with clean water after exposure to corrosives or dirt. While the motor and controller may be waterproof, Castle suggests users confirm that the rest of their vehicle, including the batteries, servos, radio and chassis are also waterproof before exposing them to liquids of any kind. The cooling fan must be removed prior to driving in wet conditions. Not all LiPos are created equal, and surge ratings should never be used to determine a packs suitability for a brushless application. Mamba Monster setups frequently hit 100+ amps in peaks. Castle's experience suggests using only mild gear ratios with NiMH cells. Do not attempt to use NiMH cells in extreme setups.
The item "Castle Creations Monster X 1/8 Brushless Combo with1515 Sensored Motor" is in sale since Friday, June 14, 2019. This item is in the category "Toys & Hobbies\Radio Control & Control Line\RC Model Vehicle Parts & Accs\Control, Radio & Electronics\Speed Controllers". The seller is "amain" and is located in Chico, California. This item can be shipped worldwide.