CNC Engraving 0.4KW Brushless Spindle Motor ER11 & Driver Speed Controller & Mount. Specification: - Spindle Motor work voltage: 48VDC - Rotation speed: 12000r/min - Power: 400W(peak power 500W) - Torque:530mN. M - Insulation resistance:>2Megohm - Dielectric strength:400V - Motor Diameter:57mm - Axis collet Length: 43mm - Diameter of Axis collect holder:16mm - Repeat accuracy: 0.01-0.03mm - ER11 collect: 3.175mm - Net weight:1.1KG - For engraving machine Brushless DC speed driver controller: - speed driver controller working voltage: DC12-52V - Driver current: Rated current 10A, Peak current 15A.
The drive power: 500w (up to working voltage) - Speed/Current alike close loop technology, smooth rotation - Pure hardware design, high-speed, high noise immunity - Speed regulation: external potentiometer adjust, 0-5V analog voltage , PWM speed control (MACH3 control) - F/R(forward / reverse control) Rotation, soft shift function - Over current, short circuit protection (red LED indicator) - EN(enable control) function Function description: Speed regulation choice - Potentiometer speed regulation: You can control speed directly through potentiometer - Analog control:VR connect to voltage signal input. GND connect to ground (voltage range of 0-5V) Notice. When you use external PWM signal speed control, you must be remove the potentiometer control. Otherwise, it will not working - PWM signal control: you can input an external PWM signal to speed control. It requires external PWM: level 3.5-12V VPP, frequency 1K-10KHZ, which suitable for MACH3 spindle speed control.(Notice: external PWM signal control necessary to remove the potentiometer , or it can not control). Motor Run/StopENBL: EN terminal is applied to control motor Run / Stop. Motor is running When EN is floating. Motor stop running when EN connect to GND terminal. Motor forward / reverse control (F / R) : F/R terminal is applied to control motor rotate direction.
Motor run clockwise when F/R is connecting +5V, otherwise motor will reverse. Package Content: - 1 400W spindle motor with with ER11 3.175 collet - 1 Mach3 PWM speed controller - 1 Mount bracket with screws. Or unpaid dispute will be filed for non-payer after 7 days of sales day. If you receive defective item, please kindly notify us within 14 days. The item "CNC Engraving 0.4KW Brushless Spindle Motor ER11 & Driver Speed Controller&Mount" is in sale since Friday, July 8, 2016.
This item is in the category "Business & Industrial\Automation, Motors & Drives\Electric Motors\General Purpose Motors". The seller is "thanksbuyer-hobby" and is located in Shenzhen. This item can be shipped worldwide.