Motor Speed Controller

Foredom Chisel Carving Set K. 2252 High Torque LX Motor Emx Dial Speed Control

Foredom Chisel Carving Set K. 2252 High Torque LX Motor Emx Dial Speed Control

Foredom Chisel Carving Set K. 2252 High Torque LX Motor Emx Dial Speed Control    Foredom Chisel Carving Set K. 2252 High Torque LX Motor Emx Dial Speed Control
FOREDOM CHISEL CARVING SET K. PrePackaged Tool Kits contain just about everything you need to get to work- motor, speed control, handpiece and accessories. They take the guesswork out of product selection, offer the best value, and feature smart tool combinations for specific applications. These permanent magnet motors are specifically designed for high torque/low speed applications, offering more power for jobs like stone setting, wax modeling, and pearl drilling.

LXB ball bearing motors feature full power and torque from start up and throughout the entire speed range up to 5,000 rpm. They are ideal for use with Foredoms drill presses. They also are well matched with the H.

15D Quick Change and Hammer Handpieces for stone setting. It comes equipped with a motor bale for hanging, and our standard 39 long key tip inner shaft and special/more flexible neoprene outer protective sheath for connecting to any of Foredoms 20+ interchangeable handpieces. LX motors are available in 115 Volt and 230 Volt. Foredoms permanent magnet motors require the use of a C. Damage will result if the motor is connected to any other speed control.

This table top speed control is constructed of heavy duty plastic with durable solid state electronics. It has a dial control for precise speed settings, as well as good repeatability of previous settings. EMX-1 has special electronics that converts AC current from an electrical outlet to DC current- the type required by the motor.

It also has a special plug that fits the motor's shielded plug. For use with 115 Volt M. It is interchangeable with Foredom's C. Foredom's chisel handpiece gives a power assist to carving projects in all types of wood, plastic, and plaster.

This handpiece has a contoured body design that features a rugged plastic barrel and tapered aluminum ends. The easy to maintain chisel handpiece is recommended for use at low speed with Series TX and LX motors and in forward rotation only with Series SR motors. Handpiece attaches to any flex shaft machine with a standard key tip shaft.

The Chisel Handpiece must be used only in the forward motor direction. Recommended Speed: Optimum Speed Range- 3,000-10,000 rpm. Operating Speed- 18,000 rpm.

Handpiece specifications: 6" long, 1" in diameter, weight: 4.6 oz. Maintenance: After every 200 hours of use you should clean and lubricate this handpiece. The old grease must be cleaned off of the interior cam chamber and replaced with new lubricant. If you do not have Foredom Grease Part No. MS10008, it is available in our web store under Supplies and Parts - Lubrication- All Lubricants. Using the chisel handpiece with a dial speed control is easier than with a foot operated control. Table top dial controls are available separately and named below. Consider ordering a kit containing the chisel handpiece and dial speed control kit depends on motor -M. Certain Foredom bench mounted flex shafts also come with dial controls built into their bases models M.

6pc Chisel SetAKHK550 with A-KC503, A-KC504, A-KC505, A-KC506, A-KC509, and A-KC510 chisels. AKHK560 with A-KC501, A-KC502, A-KC507, A-KC508, and A-KC511 chisels and 6pc Chisel Set AKHK570 with A-KC512, A-KC513, A-KC514, A-KC515, A-KC516, and A-KC517 chisels. Flexible shaft grease and ATAT-1 Accessory tray.

Our products are never used, reconditioned, or rebuilt. Both options are available on request at additional cost. If you are satisfied with our service, please leave us a. Your recognition will make us more confident to develop business, serve you better, and provide more competitive pricing.

We understand the concerns and frustrations you might have, and will do our best to resolve the issues. Please give us the opportunity to resolve any problem. We care about our valued buyers, if you have any questions, please.

We try our best to reply to your emails as soon as possible, however. Due to high volume of daily incoming emails and time zone difference; we may not be able to reply your emails immediately. By purchasing our item(s), you agree to accept these terms and conditions.

The item "FOREDOM CHISEL CARVING SET K. 2252 HIGH TORQUE LX MOTOR EMX DIAL SPEED CONTROL" is in sale since Wednesday, June 27, 2012.

This item is in the category "Crafts\Home Arts & Crafts\Woodworking\Wood & Project Materials\Carving Wood". The seller is "favoriteusa" and is located in New York, New York.

This item can be shipped worldwide.

  • Brand: FOREDOM
  • Model: K.2252
  • Country/Region of Manufacture: United States
  • Country of Manufacture: United States


Foredom Chisel Carving Set K. 2252 High Torque LX Motor Emx Dial Speed Control    Foredom Chisel Carving Set K. 2252 High Torque LX Motor Emx Dial Speed Control