The V10 G3 series motors deliver a 4% increase in torque, and a 16% increase in KV compared to the G2 series. The motors are super light weight that allows you more options for chassis balance adjustment, and the lightweight motor can helps to keep the motor cool, with efficient heat dissipation. This combo provides the extra advantage every racer can use, with minimal maintenance required. 10 select-to-use profiles including zero-timing/blinky mode, modified mode, stock mode applicable to all 1/10th touring car, pan car and buggy racing.
Internal electronic key switch for. Built-in switch mode BEC with a maximum output of 4A and voltage adjustable between 6V and 7.4V for usage with high voltage servos. Separate PRG/FAN port is able to power an external fan for maximize cooling performance or connect a LCD program box or WiFi module to the ESC. With the optional WIFI express module from Hobbywing (HWA30503000 - not included) users are able to program parameters, upgrade firmware and check relevant data during the event using either the Iphone or Andriod devices. Brake and throttle adjustment: 100 levels of brag brake, 50 levels of initial brake force, 9 levels of maximum brake force, 20 levels of brake rate, and 30 levels of throttle rate.
Adjustable brake mode, PWM and brake frequencies and for different competitions and control feel. Adjustable Turbo Timing & Boost Timing for different applications.
Multiple protections: low-voltage cutoff protection, ESC and motor thermal protection, and fail safe (throttle signal loss protection). Data logging for recording the maximum ESC/motor temperature, motor speed/RPM, and others in real time.
First-rate Linearity: The built-in high precision Hall sensor combined with the high precision and balanced rotor will guarantee remarkable linearity of the motor. Super Lightweight: The G3 Modified & Stock motors only weigh 161g and 132g respectively; the weights are reduced by about 11% & 21% when comparing with the V10 G2 motor. Asymmetric Bearings: By comparison (with the V10 G2 motor), for improving the load-carrying capacity, the size of the front bearing of the G3 motor is increased by 26% ; while for lower resistance, the size of the rear bearing is reduced by 6%.The asymmetric bearing design will make the motor running more stable and smooth. Great Heat Dissipation: The special shell design which makes the stator core (/laminations) expose to the air will maximize cooling, the big holes on the front & rear end plates will guarantee outstanding heat dissipation of the motor. Stepless Adjustable Mechanical Timing: The mechanical timing can be adjusted finely and smoothly; the skid-proof lines at the rear end of the motor will guarantee stability of the timing after adjustment. Re-buildable Structure: The detachable structure design for regular cleaning & maintenance will effectively prolong the service life of the motor and retain its efficiency. Two Different End Plates: The end plates with big holes adopted by the 3.5T5.0T & 10.5T21.5T motors will guarantee excellent heat dissipation of the motor for on-road applications.
The end plates with small holes used by the 5.5T8.5T motors will effectively prevent sand or dirt from getting inside and damaging the motor for off-road applications. High-quality Components: The use of high-performance stator core (/laminations), heat(200)-resistant pure copper wire, heat(200)-resistant rotor with strong structure, international top brand high-precision and high strength bearings, and copper solder tabs with super current endurance will guarantee excellent performance and great durability. ID: XR10 PRO ESC 30112600 (Black). Scale: 1/10th Brushless Sensored ESC.
Power input: 2-3S LiPo/4-9 Cell NiMH. BEC output: Swich Mode6V/7.4V, 4A.
Size: 37.5x30.9x31.6mm (w/Fan & Fan Shroud). Cooling Fan: 25.0x25.0x10.0mm. Voltage Range: 5V-7.4V (powered by BEC). Application: 1/10th Touring Car, Buggy, Drift Car, F1; 1/8th, 1/10th Rock Crawler. 2S LiPo/6S NiMH: (Touring Car) T3.5T, (Buggy) T4.5T.
3S LiPo/9S NiMH: (Touring Car) T6.5T, (Buggy) T8.5T. No Load Current: 6.7A. Amps at Max Power Output: 122A. Applications: Modified 1/12 & 1/10 on road.
XR10 PRO ESC w/cooling fan. V10 V3 Motor - 4.5T. (2) Input wires 12AWG-200mm (factory installed).
(3) Output wires 12AWG-200mm (factory installed). Bonus parts: heat tubes, double tape, nylon cable zap traps.
Please note: I will not put less amount on custom papers, so please don't ask. You can return any item in Brand New/unopened condition (within 14 days). The item "Hobbywing 38020229 XR10 Pro Sensored Brushless ESC/V10 G3 Motor Combo (4.5T)" is in sale since Sunday, November 11, 2018.This item is in the category "Toys & Hobbies\Radio Control & Control Line\RC Model Vehicle Parts & Accs\Control, Radio & Electronics\Speed Controllers". The seller is "power_hobby" and is located in Mahwah, New Jersey. This item can be shipped to United States, all countries in Europe, Canada, Japan, Australia.