This listing is for the Hobbywing JS6 Sensored Brushless Combo. This includes XR10 60 amp sensored ESC 21.5T (1800kv) sensored motor AND LCD Program Box. Compact design for easy installation. Compatible with sensored/sensorless brushless motors.In sensor mode, its compatible with most popular sensor- brushless motors on the market. In sensorless mode, its compatible with 99% of brushless motors on the market. Aluminum housing top with excellent heat dissipation and great current endurance. The timing has been permanently set to 0 degree. With the identical competition motor, this ensures that every driver will have the same power system.
Proportional brake with 4 steps of maximum brake force, 8 steps of drag brake force and 4 steps of initial brake force. 9 levels of acceleration/ punch from soft to aggressive for different vehicles, tires and tracks.
Multiple protections: motor lock-up protection, low-voltage cutoff protection, thermal protection and fail safe (throttle signal loss protection). Single-button ESC programming and factory reset. Advanced programming via portable LED program card or multifunction LCD program box. Firmware upgrade via HOBBYWING multifunction LCD program box. HOBBYWING's Innovative heat dissipation structure aluminum bottom case improves the heat dissipation - Patent pending.Pre-soldered professional grade gauge wires. 2-3S LiPo or 4-9 cells NiMH/NiCd. Via RX Cable (or Throttle Control Cable).
Sensor and sensorless brushless motor. With 2 Lipo or 4-6 NiMH 1/10 on-road: >=8.5T, 1/10 off-road: >=11.5T With 3 Lipo or 7-9 NiMH 1/10 on-road: >=13.5T, 1/10 off-road: >=17.5T. 1/10,1/12 all competitions 1/10,1/8 rock crawler. Powered by stable BEC 6V. 33.5mm(L) 28.5mm(W) 30.5mm(H).59.8g (w/o wires, cooling fan). 4-6 cells NiMH/NiCd or 2S LiPo. The standard cooling fan needn't be changed. 7-9 cells NiMH/NiCd or 3S LiPo. The standard cooling fan needs to be changed to 12V high voltage fan.
Compliant with ROAR and IFMAR rules. 200 high temperature high purity copper windings maximizes conductivity and reliability. Super low resistance multi-layers outlet PCB (Printed Circuit Board). High RPM precision bearings (Germany Brand: NSK).Powerful high temperature sintered NdFeb (Neodymium) magnets. High efficiency of energy conversion. 1:10 , 1:12 On-Road (Truggy / Drifting Car / F1 / Monster) & Off-Road (Buggy / 2WD SC Truck /Truck) STOCK / SPORT Race choose the motorbase on competition rules. Free / casual run for new beginners. Rock Crawler (21.5T only).
Dimension (mm) Can: Ø=35.8, L=52.5, External Shaft: Ø=3.17, L=15.0. 35.8 (L)= 52.5 Shaft: dia.
3.17mm Length of Projecting part 15. SMART ESC Programmer LiPo Battery Voltmeter USB Adapter for PC connection.
Firmware is now compatible with all speed controllers! 1.1 Works as an individual device to set the ESC. The value of each parameter is displayed on the LCD screen. 1.2 Works as a USB adapter by linking the ESC to a PC to update the firmware in the ESC or set the ESC by using Hobbywing USB link software.1.3 Works as a LiPo battery voltmeter to measure the voltage of the whole battery pack or each cell. 1.4 Uses a MCU (microprocessor) with larger memory. 2.1 Size: 90mm (L) 51mm (W) 17mm (H). 2.2 Weight: 65g 2.3 Input Voltage: 4.5-12.6V. (If the ESC does not have a built-in BEC, you must use an additional battery pack to supply the program box). 2.4 Displayer: 162 character LCD. 2.5 Interface: Mini USB interface, ESC interface (Futaba plug), Power supply interface (Futaba plug). This program card is suitable for the following ESCs. XERUN Series Car ESC (Version 3.0 and above). EZRUN Series Car ESC (Version 2.0). Are: 3.1 Running Mode 3.2 Drag Brake Force 3.3 Low Voltage Cut-Off Threshold 3.4 Start Mode 3.5 Maximum Brake Force 3.6 Maximum Reverse Force 3.7 Initial Brake Force 3.8 Throttle Neutral Range 3.9 Timing 3.10 Over-Heating Protection 3.11 Motor Rotation 3.12 LiPo Cells.
Are: 3.1 Brake Setting 3.2 Battery Type 3.3 Low Voltage Protection Mode (Cutoff Mode) 3.4 Low Voltage Protection Threshold (Cutoff Threshold) 3.5 Start Mode 3.6 Timing 3.7 Governor Mode 3.8 Motor Type 3.9 PWM Frequency 3.10 Built-In BEC Output 3.11 Motor Load 3.12 LiPo Cells. The item "Hobbywing Sensored Brushless System Combo ESC 21.5T 1800Kv Motor Crawler Drift" is in sale since Thursday, July 21, 2016. This item is in the category "Toys & Hobbies\Radio Control & Control Line\RC Model Vehicle Parts & Accs\Control, Radio & Electronics\Speed Controllers".The seller is "downeasthobbies" and is located in Limerick, Maine. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.