Expanded range of the max. Brake force brings in the active brake ranges from 101% to 150%. Softening function (HOBBYWING-initiated) for milder or wilder driving control and better driving efficiency. 10 select-to-use profiles applicable to all 1/10th RC car racing.
Internal electronic key switch for long service life, high reliability; and the external switch port for connecting an external switch (included in the product box) is applicable to different situations. Switchable motor direction (CCW/CW) for various chassis. Multiple protections comes in standard. ESC and motor thermal protection.
Fail safe (throttle signal loss protection). Data logging for recording the maximum ESC/motor temperature, motor speed/RPM, and others in real time. The G3 Modified & Stock motors only weigh 161g & 132g respectively, the weights are reduced by 11% & 21% when compared with the previous generation G2 motors. The built-in high precision Hall sensor combined with the high precision and balanced rotor guarantee an outstanding linear feel to the motor.
The mechanical timing can be adjusted finely and smoothly; the skid-proof lines on the rear end plate of the motor guarantee the stability of the timing after adjustment. For G3 Stock motors (10.5T25.5T), the timing is adjustable from 30 degrees to 60 degrees; for Modified motors (3.5T8.5T), the timing is adjustable from 20 degrees to 50 degrees. The motor case is designed to be easy to dismantle for maintenance purposes and for the replacement of common wearing parts. The special shell design which makes the stator core expose to the air maximizes cooling. Big holes on the end plates of 10.5T21.5T motors further help reduce heat; small holes on the end plates of 5.5T8.5T motors effectively keep sand or dirt from getting inside and damaging the motor(s).
The use of high-performance stator core, heat-resistant wire, heat-resistant rotor with strong structure, imported high precision and high strength bearings, and copper solder tabs with super current endurance guarantees outstanding performance and super durability. Compliant with IFMAR, ROAR, EFRA, BRCA rules, and certified by RoHS, CE, FCC. Motor Supported: Sensored Brushless Motor. Input: 2-3S LiPo/4-9 Cell NiMh.BEC Output: 6V/7.4V Switchable, Continuous Current of 4A (Switch-mode). Fan (Included): 25.0x25.0x10.0mm. Powered by the stable BEC voltage of 6V/7.2V. Size/Weight: 37.5x30.9x31.6mm (w/Fan & Fan Shroud); 95g (w/ Wires).
The item "Hobbywing XR10 Pro G2 Sensored Brushless ESC/V10 G3 Motor Combo (3.5T)" is in sale since Tuesday, October 8, 2019. This item is in the category "Toys & Hobbies\Radio Control & Control Line\RC Model Vehicle Parts & Accs\Control, Radio & Electronics\Speed Controllers". The seller is "amain" and is located in Chico, California. This item can be shipped worldwide.