High quality reliable 4s brushless system for 1/8 RC cars and trucks, also fits some 1/10. We have tested these extensively in E-Revos and Slash 4x4s with excellent results. The Motor is 2100kv 4 pole 80A constant with 5mm shaft and 1/8 size can 43x64mm, high quality built by Hobbywing. The Speed Controller is 100A 4s rated, a robust and reliable unit with plenty of programming options and high quality components. It has LiPo cut-off as a default setting.Also includes an upgraded latching switch. If no connector choice is made, we will fit Deans and 4mm bullets for ESC only option. Brushless motors must be geared correctly according to temperature. Normal temperature range is 30-50c. Lower means the motor is under-geared, higher means it is over-geared and must either be geared down or fitted with additional cooling.
Maximum temperature is 80c but keep below 65c as a safe limit. Exceeding this will de-magnify the rotor causing motor failure and often ESC failure also. For best performance we recommend using a fan with brushless motors, even at 80-90%+ efficiency they produce 50-200w of hea t under load. The item "Turnigy 1/8 4s 14.8v Brushless System 100A Speed Control ESC, 2100kv Motor" is in sale since Wednesday, April 1, 2015. This item is in the category "Toys & Games\Radio Control & RC Toys\RC Model Vehicle Parts & Accs\Control, Radio & Electronics\Speed Controllers".
The seller is "powerpeak-rc" and is located in Northamptonshire. This item can be shipped to European Union member countries.