Through the use of Castle's Smart Sense technology, the position of the rotor is always known by the ESC. This eliminates the possibility of encountering cogging or inconsistency during startup, and allows the 1512 to deliver PRECISE throttle control and BUTTERY SMOOTH starts - with the RAW POWER and LONGER RUN TIMES that Castle motors are known for. Not intended for operation while submerged in liquid.
If unit is operated in wet conditions, rinse with fresh water to remove dirt or corrosives, then fully dry unit. The cooling fan must be removed prior to driving in wet conditions.4-POLE 12-SLOT design boasts exceptional EFFICIENCY and produces LESS HEAT. Oversized gold plated solder tabs for LESS RESISTANCE and easy soldering. Technology shields magnetic field noise generated from the motor coils and keeps motor and ESC in sync at all times.
HIGHER PRECISION and MORE EFFICIENT startups. OPTIMIZED design eliminates the need for mechanical timing adjustments. Sensor alignment method delivers uniform timing and torque in both directions, automatically.REBUILDABLE design allows users to replace front end bell with bearings or rotors with shaft. ROAR standard sensor port and labeled connections. High strength 180°C neodymium sintered magnets. 10 AWG high strand wire with silicone insulation. 6061-T6 Billet aluminum heatsink can. High RPM NMB oversized bearings.
High quality 0.2mm steel laminations. Low resistance gold plated bullet connectors. Input Voltage Range: 2S - 6S LiPo. BEC Specifications: User selectable output between 5 and 7 volts; default 5.5 volts.Operating Environment: Waterproof design allows for use in nearly any environment. Reversible: Yes, but may be disabled for racing. Cooling Fan: Yes, factory equipped, fully removable (see Product Use Statements below). Weight (with no battery connector): 3.93 oz. Connectors: 6.5mm female bullets for motor connection. Application Guidelines: Intended for up to 6S (25.2 Volt) operation in vehicles weighing less than 15 lbs, with batteries, ready-to-run. Recommended Motors: Neu-Castle 1512 2650Kv: Max Cells: 4S Lipo or 12 NiMH. Neu-Castle 1515 2200Kv: Max Cells: 6S Lipo or 16 NiMH. Recommended Vehicle Weight: Less than 15 lbs, with batteries, ready-to-run with 2200kv motor; no more than 9 lbs with 2650kv motor.
Programmability: Fully programmable Castle feature set using Castle Link USB adapter (coupon for free Link included) and freely downloadable Castle Link Windows software. Input Voltage Range: 2-4S LiPo. Diameter: 40mm (41.1mm w/fins).Weight (w/wires): 383 g / 13.6oz. Cooling Fan: Optional - Coming Soon. Connectors: 6.5mm male Castle Bullet Connectors. Application Guidelines: Ideal for 1:8 scale off-road and on-road vehicles as well as 1:10 scale 4WD SCT up to 9lbs. Recommended Vehicle Weight: Up to 9lbs.
Tech Notes: Running modes: SMARTSENSE, Sensored, Sensorless. NOTE: Not all LiPos are created equal, and surge ratings should never be used to determine a packs suitability for a brushless application. Mamba Monster setups frequently hit 100+ amps in peaks. Use only mild gear ratios with NiMH cells. Do not attempt to use NiMH cells in extreme setups.
The item "Castle Creations Mamba Monster 2 Waterproof 1/8 Scale Brushless Combo (2650Kv)" is in sale since Friday, July 12, 2019. This item is in the category "Toys & Hobbies\Radio Control & Control Line\RC Model Vehicle Parts & Accs\Control, Radio & Electronics\Speed Controllers". The seller is "amain" and is located in Chico, California.
This item can be shipped worldwide.