Motor Speed Controller

Hobbywing EZRUN Combo MAX10 SCT 3660SL 3200kv Brushless Motor #HW38010200

Hobbywing EZRUN Combo MAX10 SCT 3660SL 3200kv Brushless Motor #HW38010200

Hobbywing EZRUN Combo MAX10 SCT 3660SL 3200kv Brushless Motor #HW38010200    Hobbywing EZRUN Combo MAX10 SCT 3660SL 3200kv Brushless Motor #HW38010200
Hobbywing EZRUN Combo MAX10 SCT 3660SL 3200kv Brushless Motor #HW38010200. High Reliability & Durability Built with the most rugged and high-quality components and coupled with cutting-edge firmware, the EzRun MAX10 SCT is able to deliver unmatched power and performance for even the most hardcore of racing applicatinos, but is also responsive enough to protect itself from damage due to overloading due to physical abuse, overuse or even human error. Great Flexibility & Versatility With incredible acceleration capabilities and a rock-solid, stable output, the MAX10 SCT can handle instant full-torque start-ups for wheelies, high-speed racing on straightaways and powering through the bumpiest terrian. The user will have the choice of adusting the ESC parameters as per his perference and ability. Advanced and Secure Electronic Switch The MAX10 SCT features an electronic switch with a lifespan of over 50000 on/off cycles, housed in a completely waterproof, dust-prood and shock-resistant design.

Applicable to All Weather Conditions The waterproof and dust-proof design allows the MAX10 SCT to be used in all weather conditions without any issue of damage caused to the ESC from water or dust. Innovative Filter Capacitor Thermal Protection The filter capacitor thermal protection first implemented in the MAX10 SCT will effectively protect capacitors from exploding and causing irreversible damage to the ESC due to overload. Regular Firmware Updates Free of Charge You can upgrade the MAX10 SCT with the HobbyWing USB LINK software, a multifunction LCD program box and a laptop. HobbyWing updates its ESC firmware regularly giving you upgraded features more often when available. Wide Applicability This MAX10 SCT ESC is applicable to various 1/10th scale vehicles like trucks, short-course trucks, monster trucks, and etc.

Input - 2-4S LiPo/6-12 Cells NiMH. BEC Output - Switch Mode:6V/7.4V, 3A. Output Connecotors - 4.0 Bullet Connectors (Female).

Note: All the wire length above is the original length not the length you see from the outside. Size - 25.0x25.0x10.0mm. Voltage Range - 5-7.4V. Powered by - Powered by BEC.

ESC Programing via SET Button on ESC - Supported LED Program Box - Supported LCD Program Box - Supported WiFi Module - Supported Program Port - FAN/Program Port. Firmware Firmware Upgrade - Supported. Size - 49.0x39.5x34.7mm. Motors - SL BL Motors/SD BL Motors(only in SL mode).

High Torque The 4 pole design will guarantee the motor to produce very large amounts of torque, a much faster acceleration response and a very stable output of power to the drivetrain. Low Cogging Torque The first motor adopted the innovative 4-pole-8-magnet "staggered pole" rotor (Hobbywing-patented design) (in the RC field) has the extremely low cogging effect and low torque pulsation (it's reduced by 85% when comparing with conventional 1/10th scale 4-pole motors). Motor Thermal Protection When pairing the EzRun 3652/3660 G2 with a Hobbywing EzRun MAX10-SCT or MAX10 ESC, the built-in temperature sensor and sensor port at the load end (for connecting to ESC) will make the motor thermal protection available to protect the motor from damage due to overheat.

Excellent Structure The O-ring seal fitted between the front end bell and motor case isolates screw holes from inner parts to prevent liquid or dust from getting inside and protect motor from damage. The special design implemented by the motor case (the end attaches to the front end bell) isolates inner coils from outside to protect winding from being damaged by overlong screws. High Efficiency Hobbywing's temperature control technology has been designed to protect the motor from being damaged by heat thus less heat more efficient the motor will run and perform. The output performance of this motor has an efficiency rate of up to 90%, a leading level in the RC world. Quality Materials & Excellent Design The use of double insulated windings 240? , Japanese bearings and silicon steel sheets guarantees users the outstanding performance and super durability.

The wheel hub design of the front & rear end bells reduces the motor weight. Compatible (with the EZRUN MAX10-SCT/MAX10 ESC) When pairing the EzRun 3652/3660 G2 motor with a Hobbwing EzRun MAX10-SCT/ MAX10 ESC, the excellent match between ESC and motor will give you large torque plus a very smooth and linear power band. 3660SL = 36 diameter, 60mm length for the above. So longer motor with 5mm shaft diameter.

EZRun 3660SL Brushless Motor (3200kV). Hobbywing Multifunction LCD Program Box - HW30502000014. Hobbywing Program Box - HW86020010. UK - Isle of Man, Isle of Wight.

UK - Northern Scotland, Highlands, Islands. Southern Scotland postcodes, which do not attract a carrier surcharge, are as follows: DD, DG, EH, FK, G, KA (except KA27 & KA28), KY, ML, TD, AB1 - AB16, AB21 - AB25, AB30, AB39, PA1 - PA19, PH1 - PH3. The item "Hobbywing EZRUN Combo MAX10 SCT 3660SL 3200kv Brushless Motor #HW38010200" is in sale since Thursday, April 18, 2019. This item is in the category "Toys & Games\Radio Control & RC Toys\RC Model Vehicle Parts & Accs\Control, Radio & Electronics\Speed Controllers". The seller is "modelsport_uk" and is located in Otley, West Yorkshire, United Kingdom.

This item can be shipped to all countries in Europe, United States.

  • Brand: Hobbywing
  • MPN: HW38010200
  • EAN: 5051294121082

Hobbywing EZRUN Combo MAX10 SCT 3660SL 3200kv Brushless Motor #HW38010200    Hobbywing EZRUN Combo MAX10 SCT 3660SL 3200kv Brushless Motor #HW38010200