Motor Speed Controller

Mamba X SCT Sensor 25.2V ESC/1415-2400kV Motor Castle Creations CSE010016000

Mamba X SCT Sensor 25.2V ESC/1415-2400kV Motor Castle Creations CSE010016000

Mamba X SCT Sensor 25.2V ESC/1415-2400kV Motor Castle Creations CSE010016000   Mamba X SCT Sensor 25.2V ESC/1415-2400kV Motor Castle Creations CSE010016000
The Mamba X is extremely versatile, capable of powering a wide variety of applications ranging from 2S to 6S and vehicles ranging from 1/10th scale to 1/8th scale. Whether you are racing at the track with your 2wd buggy, bashing through puddles and mud in your SCT or monster truck, or navigating a hardcore crawling excursion, this controller raises the bar to a whole new level. This is the perfect setup for 2WD and 4WD Short Course trucks weighing up to 6.5lbs running on a 3s or 4s LiPo with included 1415 - 2400kv sensored motor.

ESCs have a tough life - landing extreme jumps, experiencing accidental collisions, and splashing through the occasional puddle. As R/C enthusiast themselves, Castle engineers understand this and designed the Mamba X to endure these situations and power through them. It is housed in a rugged CNC-machined aluminum case and then potted in waterproof epoxy.

This not only protects the electronics but ensures any heat generated in the controller can easily be dissipated through the case. The high performance Mamba X includes an integrated and powerful 8A adjustable BEC and can push the most extreme 1/10th scale setups and 1/8th scale race buggies. SmartSense allows you to take advantage of smooth, cog-free, and predictable sensored starts, and Castles new and improved throttle response keeps you ahead of the competition. SMARTSENSE Enabled by default, the Mamba X uses the motors sensors to provide smooth starts, excellent torque, and low-speed drivability.

Once the motor is turning, it seamlessly transitions to Castles ULTRA-EFFICIENT sensorless mode with electronic timing. When running, a motor must transition between different load points and a different timing advance is required for optimal efficiency at each. Electronic timing in SMARTSENSE will advance timing automatically for peak performance during all driving conditions. This combines the best of both worlds in an unrivaled HYBRID between smooth sensored startups and high-efficiency sensorless running.

Your motor will produce more power and less heat. AUXILIARY WIRE FUNCTIONALITY The Mamba X allows on-the-fly adjustments to be made through the AUX wire once enabled in Castle Link. Once you have selected an AUX wire function, that setting can then be tuned from your transmitter while driving. Torque control, max throttle, max brake and drag brake adjustments are a sampling of the available modes. This real-time tuning allows you to quickly and easily fine-tune your system.

DATALOGGING Enabled by default, the Mamba X captures and records performance data from your vehicle. This allows you to view a detailed turn-by-turn record of what your ESC actually experienced during the run. You will be able to record real-time data such as motor RPM, battery current and voltage, ESC and motor temperature, throttle input, and more.

Download and analyze the collected data via Castle Link and make adjustments to maximize both performance and battery life. CASTLE LINK For nearly 20 years Castle engineers have been setting the bar for industry leading software functionality. The Castle Link Programming Suite is your ticket to creating the perfect setup. Download the simple to install software from our website and you are ready to personalize your controllers parameters.

Dont forget to use the check for updates feature in Castle Link to download new software as it becomes available. New features are yours at no cost, a perk for choosing Castle.

Wide 2S to 6S input voltage range. Sensored Motor Support (Castle X-Series Sensor Harness Included). 8A Adjustable BEC (5.25V-8.0V). MIN: 2S LiPo MAX: 6S LiPo (25.2V) (4s maximum with included 1415 -2400kv motor).

Adjustable: 5.5V, 6.0V, 7.5V. Or 8.0V (8A Peak), default 5.5V.

Waterproof design allows for use in nearly any environment. Yes, but may be disabled for racing. Yes, factory equipped (30mm), fully removable (see Product Use Statements below).

Length: 2.14" (54.4mm) Width: 1.39" (35.2mm) Height: 1.18 (30.0mm). 4.0mm female bullets for motor connection. Battery Connector required, Castle 6.5mm Polarized Connectors, Castle 4.0mm Polarized Connectors, Traxxas® Power Connectors, or Deans® Ultra Plugs are recommended. Although Mamba X is waterproof, it is not intended for operation while completely submerged in liquid.

T Always rinse the ESC and motor with clean water after exposure to corrosives or dirt. While the motor and controller may be waterproof, we suggest users confirm that the rest of their vehicle, including the batteries, servos, radio and chassis are also waterproof before exposing them to liquids of any kind.

The cooling fan must be removed prior to driving in wet conditions. Up to 6.5lbs with included 1415 - 2400kv sensored motor. Fully programmable Castle feature set using. (coupon for free link included in package).

And freely downloadable Castle Link Windows software. Mamba X setups frequently hit 100+ amps in peaks and not all LiPos are created equal.

Surge ratings should never be used to determine a pack's suitability for a brushless application. Recommended battery capacity for 1:8th scale vehicles is 5000mAh. We recommend using 30C continuous discharge or higher LiPo batteries (or high quality 25C batteries such as Traxxas® Power Cell).

Our experience suggests using only mild gear ratios with NiMH cells. Do not attempt to use NiMH cells in extreme setups. Applying voltages higher than 25.2V will cause irreparable damage to ESC. We recommend a high-current connector designed for high-powered electric systems, rated for 70+ amps. Invest in connector sets made for high-powered electric systems such as our Castle 6.5mm Polarized Connectors, Castle 4.0mm Polarized Connectors, Traxxas® Power Connectors, or Deans® Ultra Plugs.

Length: 69.5mm Diameter: 36mm. Length: 15.5mm Diameter: 1/8 (3.17mm). 4mm male Castle Bullet Connectors. Combo includes Mamba X ESC.

Running modes: SMARTSENSE, Sensored only. Water Resistant Design: The sensor board is coated with silicone conformal coating to protect the sensors from moisture. The sensor connections are not water resistant; water can cause signal loss which could result in loss of sensored capabilities.

Castle recommended applying dielectric grease to the outside of the sensor wire connections after installation of the wire. Routine maintenance is recommended after running in wet conditions. The item "Mamba X SCT Sensor 25.2V ESC/1415-2400kV Motor Castle Creations CSE010016000" is in sale since Saturday, December 19, 2020.

This item is in the category "Toys & Hobbies\Radio Control & Control Line\RC Model Vehicle Parts & Accs\Control, Radio & Electronics\Speed Controllers". The seller is "luvrc" and is located in Cookeville, Tennessee. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.

  • MPN: CSE010016000
  • Compatible Vehicle Type: Cars, Trucks & Motorcycles
  • Compatible Scale: 1:10
  • Brand: Castle Creations

Mamba X SCT Sensor 25.2V ESC/1415-2400kV Motor Castle Creations CSE010016000   Mamba X SCT Sensor 25.2V ESC/1415-2400kV Motor Castle Creations CSE010016000